H-60-880F
Studded
|
CAPACITY: 6000 lbs. ea. at speeds of 20 MPH or less
- based on 3/8" positive offset
rim
MOUNTING: 8 bolt - 8" bolt circle - 6" pilot
- 9 7/8" flange dia. Available with 8 ½"-20
tapped holes on a 5½" B.C. on back of flange for
brake drum mounting. |
|
 |
| DETAIL |
PART |
STYLE |
DESCRIPTION |
| 1 |
1-60880F-02-00 |
Studded |
Hub Cupped - 8 on 8" - SPI |
| 1A |
JLM506810 |
Studded |
Bearing Cup |
| 1B |
LM501310 |
Studded |
Bearing Cup |
| 1C |
ST-625 |
Studded |
Pressed-in Stud - 5/8"-18 |
| 2 |
SA-6000F |
Studded |
Spindle Assembly |
| 2A |
S-6000F |
Studded |
Spindle - 2¾" Dia. x 14" Lg |
| 2B |
SW-1001 |
Studded |
Spindle Washer - 1" |
| 2C |
SN-1001 |
Studded |
Spindle Nut - 1"-14 |
| 2D |
SCP-102 |
Studded |
Cotter Pin - 3/16" x 2" |
| 3 |
SL-275 |
Studded |
Grease Seal - 2¾" |
| 4 |
JLM506849 |
Studded |
Bearing Cone- 2.165" |
| 5 |
STN-629 |
Studded |
Lug Bolt - 5/8"-18 x 90° |
| 6 |
LM501349 |
Studded |
Bearing Cone- 1 5/8" |
| 7 |
1609 |
Studded |
Dust Cap |
|
| H-60-880F |
| Standard Part Numbers |
|
Hub with Cups Pressed In
| PART |
DESCRIPTION |
| 1-60880F-02-00 |
Studs Pressed In - Unpainted |
| 1-60880F-02-01 |
Studs Pressed In - Unpainted - Drilled and Tapped on Back
Side of Flange For Brakes |
| 1-60880F-04-00 |
Studs Pressed In - Painted Black |
|
Hub Assembly
(Includes: Hub Cupped, Bearings, Seal, Dust Cap, Lug Bolts / Stud
Nuts)
| PART |
DESCRIPTION |
| 2-60880F-02-00 |
Studs Pressed In - Unpainted |
| 2-60880F-02-01 |
Studs Pressed In - Unpainted - Drilled and Tapped on Back
Side of Flange For Brakes |
| 2-60880F-04-00 |
Studs Pressed In - Painted Black |
|
Hub and Spindle Assembly
(Includes: Hub Assembly and Spindle Assembly)
| PART |
DESCRIPTION |
| 3-60880F-02-00 |
Studs Pressed In - Unpainted |
| 3-60880F-04-00 |
Studs Pressed In - Painted Black |
|
Hub End Unit
(Includes: Hub Assembly and Spindle Assembly - Completely Greased
and Assembled)
| PART |
DESCRIPTION |
| 4-60880F-02-00 |
Studs Pressed In - Unpainted |
| 4-60880F-04-00 |
Studs Pressed In - Painted Black |
|